Product Overview

DeoxIT® D-Series Wipes, 100%, 50 individual wipes, zip-lock bag

Part No. K-D1W-50 (50 packets)

DeoxIT® D-Series – Contact Cleaner & Rejuvenator

Part No. K-D1W-50: (50 count)
100% Liquid, No solvents

Applicator: Non-woven Fiber Wipes, 3.0 x 3.5″, provides NO flushing action, applies 100% DeoxIT®.
Formulation: 100% DeoxIT®.
Use: When contact and connector are easily accessible. Provides wiping action – wipe with the grain recommended. No flushing action.
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.

More than a Contact Cleaner . . . Improves & Protects Connections!

DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts.

Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% cleaning action.

KEY FEATURES:

Improves Conductivity
Deoxidizes, Cleans and Preserves
Reduces Intermittent Connections
Reduces Arcing & RFI
Reduces Wear & Abrasion
* Temperature Range, -34 C (-29 F) to +200 C (400 F)

* NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Manufacturer Disclaimer