DeoxIT®, #D5L-4A (5% Solution)

DeoxIT® D-Series D5L Liquid, 5% solution, 118 mL,

Part No. D5L-4A (118 mL)

DeoxIT® D-Series – Contact Cleaner & Rejuvenator

Part No. D5L-4A:  
5% Solution, 118 mL

Applicator: Bottle, provides flushing action, applies 5% DeoxIT®.
Formulation:   5% DeoxIT®, petroleum naphtha, 3M Novec 7100.
Use: When contact and connector are easily accessible. Provides flushing action.  
Notes: Use sparingly on surfaces. When over spray is an issue, apply to lint-free cloth or swab and dab connections.. Formulation safe on plastics. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection.  Wipe off and re-apply DeoxIT®.
Container: Transferring fluid into a non-approved container for storage or resale may compromise efficacy and voids warranty.

More than a Contact Cleaner . . . Improves & Protects Connections!

DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts.

Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% cleaning action.

KEY FEATURES:

• Improves Conductivity
• Deoxidizes, Cleans and Preserves
• Reduces Intermittent Connections
• Reduces Arcing & RFI
• Reduces Wear & Abrasion
• * Temperature Range, -34 C (-29 F) to +200 C (400 F)

* NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Manufacturer Disclaimer