DeoxIT®, #D100FW-3X3 (Clean Room Wipes, 3.0 x 3.0″), 100 wipes

DeoxIT® D-Series Wipes, 100% solution, 3″x3″, 100 count, clean room wipes

Part No. D100FW-3X3
(NSN 6850-01-477-1485)

DeoxIT® D-Series – Contact Cleaner & Rejuvenator

Part No. D100FW-3X3: (100 count)
100% Liquid, No solvents

Applicator: Clean Room Wipes, 3.0 x 3.0″, provides NO flushing action, applies 100% DeoxIT®
Formulation:   100% DeoxIT®.
Use: When contact and connector are easily accessible. Provides wiping action – wipe with the grain recommended. No flushing action. 
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection.  Wipe off and re-apply DeoxIT®.

More than a Contact Cleaner . . . Improves & Protects Connections!

DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts.

Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% cleaning action.

KEY FEATURES:

• Improves Conductivity
• Deoxidizes, Cleans and Preserves
• Reduces Intermittent Connections
• Reduces Arcing & RFI
• Reduces Wear & Abrasion
• * Temperature Range, -34 C (-29 F) to +200 C (400 F)

* NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Manufacturer Disclaimer